Pneumatic Hydraulic/Engine Oil Service Unit
Provides filtered fluid to engine oil points and reservoirs or aircraft hydraulic reservoirs by the use of a pressurized tank.
STANDARD FEATURES:
- ASME certified stainless steel reservoir
- Large opening for filling tank with fluid
- 2 micron filtration
- 160psi (11 bar) certified pressure gauge
- 15ft (4.6m) hose with 37° JIC female swivel connector
- 125psi (8.6 bar) safety pop-off valve
- Shut-off valve with filler tube
- Available 2, 3, 5 and 10 gallons (7.5, 11.3, 18.9 and 37.8 liters)
- Standard schrader type valve for filling with air or nitrogen
- 8in (20cm) semi-pneumatic wheels – 10gal only
PART NUMBERS:
- SL-120-V-X
NOTE: -V denotes reservoir volume (-2, -3, -5, or -10), -X denotes fluid type.
FLUIDS:
- Option A – MIL-H-5606 Fluid (Standard)
- Option B – SKYDROL IVB
- Option C – MIL-PRF-83282
- Option D – HYJET IV
- Option E – Mobile DTE-25
- Option F – DOD-L-85734
- Option G – MIL-PRF-87257
- Option H – MIL-PRF-23699
- Option J – MIL-PRF-7808
- Other fluids available upon request.